Cogged V-Belt

8VX raw-edge cogged V-belt with 25 mm top width and 23 mm height. Inside-length options: 100-669 inches for flexible and efficient transmission.

5VX raw-edge cogged V-belt with 15 mm top width and 13 mm height. Inside-length options: 52-393 inches for flexible and efficient transmission.

3VX raw-edge cogged V-belt with 9 mm top width and 8 mm height. Inside-length options: 52-118 inches for flexible and efficient transmission.

XPC raw-edge cogged V-belt with 22 mm top width and 18 mm height. Inside-length options: 85-492 inches for flexible and efficient transmission.

XPB raw-edge cogged V-belt with 17 mm top width and 13 mm height. Inside-length options: 83-393 inches for flexible and efficient transmission.

XPA raw-edge cogged V-belt with 13 mm top width and 10 mm height. Inside-length options: 30-236 inches for flexible and efficient transmission.

XPZ raw-edge cogged V-belt with 10 mm top width and 8 mm height. Inside-length options: 15-98 inches for flexible and efficient transmission.

CX raw-edge cogged V-belt with 22 mm top width and 14 mm height. Inside-length options: 31-492 inches for flexible and efficient transmission.

BX raw-edge cogged V-belt with 17 mm top width and 11 mm height. Inside-length options: 20-374 inches for flexible and efficient transmission.

AX raw-edge cogged V-belt with 13 mm top width and 8 mm height. Inside-length options: 15-236 inches for flexible and efficient transmission.

9.5X raw-edge cogged V-belt with 9.5 mm top width and 5.5 mm height. Inside-length options: 15-82 inches for flexible and efficient transmission.

SINOCONVE automotive raw edge cogged V belts are designed for fan, alternator, pump, compressor and other engine accessory drive systems. Molded cogs on the inner side improve belt flexibility and help the belt operate around relatively small pulleys while maintaining stable V-groove engagement. The raw-edge construction supports efficient frictional power transmission and good heat dissipation. Multiple cogged V-belt profiles and lengths are available for replacement, distributor and OEM requirements. Final profile, belt length and vehicle or equipment application should be confirmed before ordering.