SINOCONVE 5M HTD-Type Tooth Rubber Timing Belt for Machinery and Pump Drives with Reliable Curvilinear Engagement
5M HTD-Type Rubber Timing Belt for Synchronous Transmission
The SINOCONVE 5M Rubber Timing Belt uses a HTD-Type tooth profile for positive engagement with a matching timing pulley. Its confirmed pitch is 5 mm, tooth height is 2.06 mm, and belt thickness is 3.80 mm.
The belt body is made from high-quality synthetic CR rubber. Fiberglass cord controls belt elongation, and a highly wear-resistant nylon elastic fabric protects the tooth contact surface. This construction is intended for synchronized motion, fixed speed ratio, repeatable positioning, and slip-free power transmission when the tooth profile, pulley, tension, and operating load are correctly matched.
5.0
Customization:
OEM and ODM Available
Manufacturing Experience:
35+ Years
Place of Origin:
China
Warranty:
Subject to the Order Contract
Packaging:
Plastic Sleeve and Export Carton
Urgent Delivery:
15-20 Days Subject to Confirmation
Delivery Time:
About 30 Days
Sample:
Available, Freight Collect
Minimum Order Quantity:
30 Pieces
Brand:
SINOCONVE
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Custom Width and Length
Available
Anti-Aging
Good
Crack Resistance
Good
Tooth Fabric
Wear-Resistant Nylon Elastic Fabric
Reinforcement
Fiberglass Cord
Belt Body
Synthetic CR Rubber
Pitch Length Range
—
Teeth Number Range
35-852
Tooth Height
2.06 mm
Bottom Tooth Thickness
3.05 mm
Tooth Angle
14°
Pitch
5 mm
Tooth Profile Family
HTD-Type
Wear Resistance
Good
Ozone Resistance
Good
Belt Thickness
3.80 mm
Type
5M
OEM/ODM
Available
Heat Resistance
Good
Product Type
Rubber Timing Belt
5M HTD-Type Tooth Rubber Timing Belt
5M is a HTD-Type rubber timing belt with a confirmed pitch of 5 mm, tooth height of 2.06 mm, and belt thickness of 3.80 mm. It is designed for curvilinear tooth engagement and higher-torque transmission in industrial machinery, pumps, compressors, processing equipment, heavy transmission, and higher-torque synchronous drives. The belt body uses high-quality synthetic CR rubber, reinforced with fiberglass cord, while the teeth are protected by highly wear-resistant nylon elastic fabric. This construction supports accurate synchronous transmission without normal operating slip, together with resistance to cracking, ozone, aging, heat, wear, and repeated dynamic bending. The tooth profile, pitch, belt width, teeth number, pulley geometry, speed, torque, and installation tension must be confirmed before production.
Confirmed Technical Data
| Tooth Profile Family | HTD-Type |
| Type | 5M |
| Pitch Pb | 5 mm |
| Tooth Angle | 14° |
| Bottom Tooth Thickness s | 3.05 mm |
| Tooth Height hg | 2.06 mm |
| Fillet rr | 0.40-0.44 mm |
| Tip Radius ra | 1.49 mm |
| Belt Thickness H/hs | 3.80 mm |
| Teeth Number Range | 35-852 |
Product Advantages
- 5M uses a 5 mm pitch profile; moderate pitch balances compact geometry with practical load capacity
- Curvilinear HTD teeth support stable torque transfer and resistance to tooth jumping
- Confirmed tooth height is 2.06 mm and belt thickness is 3.80 mm
- Confirmed teeth-number range is 35-852
- CR rubber, fiberglass cord, and wear-resistant nylon tooth fabric support stable synchronous operation
Structure
| Belt Body | High-Quality Synthetic CR Rubber |
| Reinforcement | Fiberglass Cord |
| Tooth Protection | Highly Wear-Resistant Nylon Elastic Fabric |
Operating Properties
- Excellent dynamic curve performance
- Crack resistance
- Ozone resistance
- Anti-aging performance
- Heat resistance
- Wear resistance
Typical Applications
Industrial machinery, pumps, compressors, processing equipment, heavy transmission, and higher-torque synchronous drives.
Rubber Timing Belt Tooth Profile and Size Table
The following long table combines the supplied T-Type, T-Type, HTD-Type, STS/STPD-Type, and RPP/HPPD-Type technical references. A dash means the supplied product knowledge did not confirm that parameter.
| Tooth Profile Family | Type | Pitch Pb (mm) | Tooth Angle | Bottom Tooth Thickness s (mm) | Tooth Height hg (mm) | Fillet Radius rbb (mm) | Fillet rr (mm) | Tip Radius ra (mm) | Belt Thickness H/hs (mm) | Double-Sided Thickness hs (mm) | Teeth Number Range | Pitch Length Range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T-Type | MXL | 2.032 | 40° | 1.14 | 0.51 | — | 0.13 | 0.13 | 1.14 | — | 43-2044 | — |
| T-Type | XXL | 3.175 | 50° | 1.73 | 0.76 | — | 0.20 | 0.20 | 1.52 | — | 46-124 | — |
| T-Type | XL | 5.080 | 50° | 2.57 | 1.27 | — | 0.38 | 0.38 | 2.30 | 3.05 | 22-510 | — |
| T-Type | L | 9.525 | 40° | 4.65 | 1.91 | — | 0.51 | 0.51 | 3.60 | 4.58 | 23-530 | — |
| T-Type | H | 12.700 | 40° | 6.12 | 2.29 | — | 1.02 | 1.02 | 4.30 | 5.95 | 29-440 | — |
| T-Type | XH | 22.225 | 40° | 12.57 | 6.35 | — | 1.57 | 1.57 | 11.20 | 15.49 | 53-220 | — |
| T-Type | XXH | 31.750 | 40° | 19.05 | 9.53 | — | 2.29 | 2.29 | 15.70 | 22.11 | 56-144 | — |
| T-Type | T2.5 | 2.5 | 40° | 1.50 | 0.70 | — | 0.20 | 0.20 | 1.30 | 2.00 | 42-312 | — |
| T-Type | T5 | 5 | 40° | 2.65 | 1.20 | — | 0.40 | 0.40 | 2.20 | 3.40 | 30-400 | — |
| T-Type | T10 | 10 | 40° | 5.30 | 2.50 | — | 0.60 | 0.60 | 4.50 | 7.00 | 34-536 | — |
| T-Type | T20 | 20 | 40° | 10.15 | 5.00 | — | 0.80 | 0.80 | 8.00 | 13.00 | 61-181 | — |
| T-Type | AT5 | 5 | 50° | — | 1.20 | — | — | — | 2.70 | — | — | — |
| T-Type | AT10 | 10 | 50° | — | 2.50 | — | — | — | 5.00 | 7.00 | — | — |
| T-Type | AT20 | 20 | 50° | — | 5.00 | — | — | — | 8.00 | 13.00 | — | — |
| HTD-Type | 3M | 3 | 14° | 1.78 | 1.17 | — | 0.24-0.30 | 0.87 | 2.40 | — | 35-1000 | — |
| HTD-Type | 5M | 5 | 14° | 3.05 | 2.06 | — | 0.40-0.44 | 1.49 | 3.80 | — | 35-852 | — |
| HTD-Type | 8M | 8 | 14° | 5.15 | 3.36 | — | 0.64-0.76 | 2.46 | 6.00 | — | 36-565 | — |
| HTD-Type | 14M | 14 | 14° | 9.40 | 6.02 | — | 1.20-1.35 | 4.50 | 10.00 | — | 56-340 | — |
| HTD-Type | 20M | 20 | 14° | 14.00 | 8.40 | — | 1.77-2.01 | 6.50 | 13.20 | — | 100-260 | — |
| STS-Type | S2M | 2 | — | 1.30 | 0.76 | 1.30 | 0.20 | 0.20 | 1.36 | — | 44-1914 | — |
| STS-Type | S3M | 3 | — | 1.95 | 1.14 | 1.95 | 0.30 | 0.30 | 1.94 | — | 41-500 | — |
| STS-Type | S4.5M | 4.5 | — | 2.93 | 1.71 | 2.93 | 0.45 | 0.45 | 2.81 | — | 40-201 | — |
| STS-Type | S5M | 5 | — | 3.25 | 1.91 | 3.25 | 0.50 | 0.50 | 3.41 | — | 30-560 | — |
| STS-Type | S8M | 8 | — | 5.20 | 3.05 | 5.20 | 0.80 | 0.80 | 5.30 | — | 53-500 | — |
| STS-Type | S14M | 14 | — | 9.10 | 5.30 | 9.10 | 1.40 | 1.40 | 10.20 | — | 69-322 | — |
| RPP-Type | P2M | 2 | — | 1.30 | 0.73 | — | — | — | 1.30 | — | 56-612 | 112.00-1224.00 mm |
| RPP-Type | P3M | 3 | — | 1.95 | 1.09 | — | — | — | 2.10 | — | 30-621 | 90.00-1863.00 mm |
| RPP-Type | P5M | 5 | — | 3.25 | 1.81 | — | — | — | 3.60 | — | 36-400 | 180.00-2000.00 mm |
| RPP-Type | P8M | 8 | — | 5.20 | 2.90 | — | — | — | 5.50 | — | 40-550 | 320.00-4400.00 mm |
| RPP-Type | P14M | 14 | — | 9.50 | 6.00 | — | — | — | 10.00 | — | 69-327 | 966.00-4578.00 mm |
Selection Information Required
Please provide the complete belt marking, profile type, pitch, pitch length or teeth number, belt width, pulley tooth profile, pulley tooth counts, center distance, speed, power or torque, operating environment, quantity, sample, or drawing. A timing belt must use a pulley with the matching pitch and tooth geometry. Final specifications and warranty terms are subject to the order contract.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
Related Products
QUICK LINKS
PRODUCTS
CONTACT US
Contacts: Leo Lei
Tel: 0086-18668582073
Email: sales@sinoconve.com
WhatsApp: 0086-16762209312
Address: Room 1602, sanlong building, tiangao street, south cbd, yinzhou district, ningbo, zhejiang ,china
We are focusing on material handling, power transmission and industry application.
Language
Copyright © 2026 Ningbo Sinoconve Belt Co., Ltd. - www.scconveyorbelt.com | Sitemap | Privacy Policy