SINOCONVE XH T-Type Tooth Rubber Timing Belt for Heavy Processing Equipment with Strong Load Stability

XH T-Type Tooth Rubber Timing Belt

XH is a T-Type rubber timing belt with a confirmed pitch of 22.225 mm, tooth height of 6.35 mm, and belt thickness of 11.20 mm. It is designed for trapezoidal tooth engagement and repeatable synchronous positioning in precision machinery, packaging equipment, printing systems, indexing drives, office equipment, and general synchronous transmission. The belt body uses high-quality synthetic CR rubber, reinforced with fiberglass cord, while the teeth are protected by highly wear-resistant nylon elastic fabric. This construction supports accurate synchronous transmission without normal operating slip, together with resistance to cracking, ozone, aging, heat, wear, and repeated dynamic bending. The tooth profile, pitch, belt width, teeth number, pulley geometry, speed, torque, and installation tension must be confirmed before production.

Confirmed Technical Data

Product Advantages

• XH uses a 22.225 mm pitch profile; extra-large pitch is intended for large synchronized transmission systems
• Trapezoidal teeth provide established pulley compatibility for conventional synchronous drives
• Confirmed tooth height is 6.35 mm and belt thickness is 11.20 mm
• Confirmed teeth-number range is 53-220
• CR rubber, fiberglass cord, and wear-resistant nylon tooth fabric support stable synchronous operation

Structure

Operating Properties

• Excellent dynamic curve performance
• Crack resistance
• Ozone resistance
• Anti-aging performance
• Heat resistance
• Wear resistance

Typical Applications

Precision machinery, packaging equipment, printing systems, indexing drives, office equipment, and general synchronous transmission.

Rubber Timing Belt Tooth Profile and Size Table

The following long table combines the supplied T-Type, T-Type, HTD-Type, STS/STPD-Type, and RPP/HPPD-Type technical references. A dash means the supplied product knowledge did not confirm that parameter.

Selection Information Required

Please provide the complete belt marking, profile type, pitch, pitch length or teeth number, belt width, pulley tooth profile, pulley tooth counts, center distance, speed, power or torque, operating environment, quantity, sample, or drawing. A timing belt must use a pulley with the matching pitch and tooth geometry. Final specifications and warranty terms are subject to the order contract.