SINOCONVE 3L Kevlar V-Belt Lawn & Garden V-Belt with High Flex Resistance Rubber Lawn Mower Transmission Belt

3L Kevlar Lawn & Garden V-Belt

3L is a Kevlar-reinforced lawn and garden V-belt with a 0.38 inch top width, 0.22 inch thickness, and 40° belt angle. The aramid cord reinforcement is designed to provide high tensile strength, low stretch, and resistance to shock loading. A dry-wrapped special fabric cover helps improve wear resistance, reduce slippage during clutch engagement, and protect the belt during repeated reverse flexing. The belt is suitable for compact lawn mowers, garden tractors, light tillers, and other outdoor power equipment. The supplied information does not provide a confirmed length range, so the complete belt marking, outside length, sample, or drawing must be checked before production.

Confirmed Technical Data

Product Advantages

• Compact 3L section suits small lawn and garden drive systems
• Aramid cord reinforcement supports high tensile strength and low stretch
• Dry-wrapped fabric helps reduce slippage during clutch engagement
• High resistance to repeated reverse flexing supports frequent start-stop use
• Suitable for compact mowers, garden tractors, and light outdoor machinery
• Equal power transmission
• High-load capability with low elongation and long service life
• Excellent operational safety
• Operating temperature reference: -55°C to 70°C
• Static-conductive construction available to ISO 1813
• Resistance to oil, heat, ozone, abrasion, and repeated flexing

Structure

Operating Properties

• Equal power transmission
• High-load capability with low elongation and long service life
• Excellent operational safety
• Operating temperature reference: -55°C to 70°C
• Static-conductive construction available to ISO 1813
• Resistance to oil, heat, ozone, abrasion, and repeated flexing

Typical Applications

Compact lawn mowers, garden tractors, light tillers, small outdoor power equipment, and clutching drive systems.

Length Marking Reference

For light-duty V-belts, the outside-length code may be shown in tenths of an inch. For example, 3L400 indicates approximately 40 inches outside length. The exact marking and length must be confirmed before ordering.

Selection Information Required

Please provide the complete belt marking, outside length, equipment brand and model, pulley dimensions, clutching method, operating load, quantity, preferred color, old belt sample, or technical drawing. No unverified length range has been added. Final specifications and warranty terms are subject to the order contract.