SINOCONVE 4L Kevlar V-Belt Lawn & Garden V-Belt Rubber Lawn Mower Transmission Belt with Strong Shock Resistance

4L Kevlar Lawn & Garden V-Belt

4L is a Kevlar-reinforced lawn and garden V-belt featuring a 0.50 inch top width, 0.31 inch thickness, and 40° belt angle. The aramid tensile cord is intended to control elongation and improve resistance to shock loads in clutching and variable-duty applications. Its dry-wrapped fabric cover provides good resistance to wear and tear while helping limit slippage during engagement. The belt also offers resistance to repeated reverse flexing, oil, heat, and cracking. It is suitable for lawn mowers, garden tractors, tillers, snow blowers, and other outdoor power equipment. Length must be confirmed from the complete marking, outside-length code, sample, or technical drawing.

Confirmed Technical Data

Product Advantages

• 4L section balances flexibility and load capacity for common garden machinery
• Aramid tensile cord helps resist shock loads and repeated clutching cycles
• Low-stretch reinforcement reduces the need for frequent retensioning
• Dry-wrapped fabric improves wear resistance and clutching grip
• Good resistance to oil, heat, cracking, and reverse flexing
• Equal power transmission
• High-load capability with low elongation and long service life
• Excellent operational safety
• Operating temperature reference: -55°C to 70°C
• Static-conductive construction available to ISO 1813
• Resistance to oil, heat, ozone, abrasion, and repeated flexing

Structure

Operating Properties

• Equal power transmission
• High-load capability with low elongation and long service life
• Excellent operational safety
• Operating temperature reference: -55°C to 70°C
• Static-conductive construction available to ISO 1813
• Resistance to oil, heat, ozone, abrasion, and repeated flexing

Typical Applications

Lawn mowers, garden tractors, tillers, snow blowers, and general outdoor power machinery.

Length Marking Reference

For light-duty V-belts, the outside-length code may be shown in tenths of an inch. For example, 3L400 indicates approximately 40 inches outside length. The exact marking and length must be confirmed before ordering.

Selection Information Required

Please provide the complete belt marking, outside length, equipment brand and model, pulley dimensions, clutching method, operating load, quantity, preferred color, old belt sample, or technical drawing. No unverified length range has been added. Final specifications and warranty terms are subject to the order contract.